Search by Product
Search by Application
Product List
PrintGuidelines on Printing Website Material

No.9260 Super Butyl Tape (Foam)

Slion Tape No.9260 is a tape based on EPDM foam coated with butyl rubber adhesive with excellent waterproof, airtight, vibration-proof and adhesive properties.
Because of the characteristics of the special material, it fits into the tiniest of gaps that occur in house building material and automobiles, preventing the entry of rain and wind from the outside.
It also displays durability able to withstand prolonged use and excellent characteristics such as being soundproof and vibration-proof.

Tape structure
No.9260 Super Butyl Tape (Foam)

Applications

(1) Packing for gaps in airtight houses
(2) Packing for waterproof joints in building and civil engineering
(3) Packing for auto parts

Tape Performance
Test item Unit Value
Density g/cm3 0.10
Tensile strength MPa
(kgf/cm2)
3.9
(0.4)
Elongation % 200
Hardness at 50% compression kPa
(gf/cm2)
2.9
(30)

Test method: JIS K 6767
* The values measured are referential only, not guaranteed value.
* The spec of the product maybe changed without prior notice.
* Values within brackets are referential unit values.
* Please verify whether or not this product is suitable for your usage.

Standard Size and packaging
Size (width × length) Content per carton
20mm × 5m 96 rolls
30mm × 5m 32 rolls

Please consult us for other sizes.
Content maybe changed without prior notice.

Caution
(1)
Sufficient adhesive strength may not be obtained if the surface the tape is being applied to is dirty. Remove any dirt, dust, moisture, oil, etc. before applying the tape.
(2)
Apply pressure after applying the tape to ensure sufficient adhesive strength is obtained.
(3)
Store the tape in a cool place, avoiding heat sources such as direct sunlight and heating equipment.
(4)
Do not use for electrical insulation as this is not insulation tape.
(5)
Do not directly apply the tape to furniture, walls, glass, vinyl chloride products, car bodies, etc. as this may result in adhesive deposits, discoloration or peeling of paint.
(6)
This tape is not designed for application to skin. Do not directly apply to skin as this may result in a rash or adhesive deposit.
(7)
This tape is for permanent adhesion and leaves a deposit when removed. Take care of what the tape is being applied to.
(8)
This tape is not for holding or fixing items. Be sure to use nails, screws, etc. for permanent fixing when fixing items subject to constant force.
(9)
Do not use in outdoor applications exposed to sunlight, weather, snowfall, etc.
(10) 
Please check that the tape suits your application before use.
(11)
Contact us when using the tape for special applications.
(TEL: 81-44-935-2485)
(12)
Take care when using the tape as Sliontec shall not be held liable for damage occurring as a result of using the tape.
9260050808
PrintGuidelines on Printing Website Material
 
Back to List
Top of this page