Home >> Products
Search by Product
Search by Application
Product List
PrintGuidelines on Printing Website Material

No.8781 Copper foil conductive adhesive tape

Slion Tape No. 878100 has 35 μm copper foil as a base material, to one surface of which an electrically conductive synthetic resin-based adhesive has been applied.
This tape enables electrical conductivity to an adherend, and achieves excellent conductivity in both thickness and lengthwise directions. This tape can be used for electromagnetic and electrostatic shielding as well as for antistatic purposes, etc.

Tape structure
No.8781 Copper foil conductive adhesive tape

Applications

(1) For shields
(2) For the fixing and temporary fixing of components, electrodes, and grounding conductors, etc.

Tape Performance
Test item Unit Value
Adhesion (for stainless steel plate) N/10 mm
(gf/25 mm)		 3.50
(0.9)
Tack Ball no. 9
Holding power Deviation: mm 0.1
Electric resistivity (thickness direction) Ω/inch2 2×10-2
Adhesion by adherend Copper N/10 mm
(gf/25 mm)		 3.72
(0.95)
Aluminum 3.25
(0.83)
ABS 5.17
(1.32)
PVC 6.35
(1.62)
PE 2.39
(0.61)
PP 2.82
(0.72)
Acrylic surface 4.12
(1.05)

Test method: JIS Z 0237
* The measured values shown here are reference values only, and are not intended to serve as guaranteed values.
* The specifications of the product maybe changed without prior notice.
* ( ) Values within brackets are reference values for previously used units.

Standard Dimensions and Units Per Package
Size (width × length) Content per carton
20mm × 20m 60 rolls
50mm × 20m 30 rolls

Please consult us for other sizes.
Note) Content maybe changed without prior notice.

Directions for use
(1)
Sufficient adhesive strength may not be obtained if the surface this tape is being applied to is dirty. Remove any dirt, dust, moisture, and oil, etc. before applying this tape.
(2)
In order to obtain sufficient adhesion, apply sufficient pressure in order to bond this tape after it is affixed.
(3)
Store this tape in a cool place, avoiding heat sources such as direct sunlight and heating equipment.
(4)
Do not use for electrical insulation as this is not insulation tape.
(5)
Do not directly apply this tape to furniture, walls, glass, vinyl chloride products, and car bodies, etc. as this may result in adhesive deposits, discoloration or peeling of paint.
(6)
This tape is not designed for application to the skin. Do not directly apply to the skin as this may result in a rash or adhesive deposits.
(7)
Depending upon the type of material which this product is to be applied to, this tape may leave adhesive residues or contaminate the adherent. Check well before use.
(8)
Copper foil edges possess the potential to cut. When affixing tape, exercise care in order to prevent cuts from the edges of aluminum foil.
(9)
Please check that this tape suits your application before use.
(10)
Contact us when using this tape for special applications.
(TEL: 0120-147-224)
(11)
Take care when using this tape as Sliontec will not be held liable for damage occurring as a result of using this tape.
8781060502
PrintGuidelines on Printing Website Material
 
Back to List
Top of this page