Home >> Products
Search by Product
Search by Application
Product List
PrintGuidelines on Printing Website Material

No.6510 Polyimide film tape

• Slion Tape No. 6510 is an adhesive tape formed by applying a highly heat resistant acrylic adhesive 25 μm polyimide film.
• Slion Tape No. 6510 possesses a film separator, making it applicable for punching and other processing as it is.
• Slion Tape No. 6510 can also be used in clean rooms due to the use of a plastic core.

Tape structure
No.6510 Polyimide film tape

Applications

(1) For binding and fixing lead wires
(2) For fixing shielding materials

Tape Performance
Test item Unit Value
Adhesion (for stainless steel plate) N/10 mm
(gf/25 mm)		 2.0
(510)
Holding power 40°C x 168 hours Deviation: mm <0.1
80°C x 168 hours <0.1
180°C x 30 minutes <0.1

Test method: JIS Z 0237
* The measured values shown here are reference values only, and are not intended to serve as guaranteed values.
* The specifications of the product maybe changed without prior notice.
* ( ) Values within brackets are reference values for previously used units.
* Please verify whether or not this product is suitable for your intended application.

Standard Dimensions and Units Per Package
Size (width × length) Content per carton
480mm × 100m 1 roll

Please consult us for other sizes.
No. 6500 series tapes consisting of polyimide film tape with a silicone based adhesive are also available.
Note) Content maybe changed without prior notice.

Directions for use
(1)
Remove any dirt, dust, moisture, and oil, etc. before applying this tape.
(2)
Avoid direct hand contact with the adhesive surface.
(3)
Apply this tape using a 2 kg load roller, etc. in order to achieve even application.
(4)
When this tape is applied to incorrect locations and needs to be re-applied, use new tape.
(5)
Care needs to be taken as this tape may contaminate adherends or leave adhesive on adherends when it is peeled off.
(6)
Store this tape in a cool location and avoid direct sunlight.
(7)
The figures shown in this catalogue were obtained as a result of in-house tests we believe to be reliable, but the accuracy of these values is not guaranteed.
(8)
All the contents shown in this catalogue are subject to change without notice.
(9)
Contact us when using this tape for special applications.
(10)
As this product has been designed for use at approximately 23oC, the bonding properties of this tape below 15oC are not good. Please check that this tape works well before use.
6510050825
PrintGuidelines on Printing Website Material
 
Back to List
Top of this page