Home >> Products
Search by Product
Search by Application
Product List
PrintGuidelines on Printing Website Material

No.6501 Polyimide tape

Slion Tape No. 6501 is an adhesive tape with polyimide film used for the base material to which a silicone based adhesive is applied.
Slion Tape No. 6501 can be used for temporary fixing and masking processes where heat resistance is required.
PolyCore (opaque) is a standard specification, and this product can be used in clean rooms.

Tape structure
No.6501 Polyimide tape

Applications

Heat-resistant temporary fixing and masking

Tape Performance
Test item Unit Value
Adhesion For stainless steel plates 0°C N/10 mm
(gf/25 mm)		 2.80
(710)
23°C 2.20
(560)
100°C 1.90
(485)
For glass epoxy plate 23°C 2.10
(540)
Low speed unwinding force N/10 mm
(gf/25 mm)		 2.90
(740)
Tack Ball no. 25
Holding power (40°C, 9.8N) Deviation: mm/24h 0
Tensile strength N/10 mm
(kgf/25 mm)		 50
(12.7)
Dielectric breakdown voltage(Note 1) kV 5.7
Electrolytic corrosion coefficient(Note 2) - 1.00

Test method: JIS Z 0237 (Note 1) Conforms to JIS C 2110 (Note 2) Conforms to JIS C 2107.
* The measured values shown here are reference values only, and are not intended to serve as guaranteed values.
* The specifications of the product maybe changed without prior notice.
* ( ) Values within brackets are reference values for previously used units.

Standard Dimensions and Units Per Package
Size (width × length) Content per carton
10mm × 20m 40 rolls

Please consult us for other sizes.
Note) Content maybe changed without prior notice.

Directions for use
(1)
Sufficient adhesive strength may not be obtained if the surface this tape is being applied to is dirty. Remove any dirt, dust, moisture, and oil, etc. before applying this tape.
(2)
In order to obtain sufficient adhesion, apply sufficient pressure in order to bond this tape after it is affixed.
(3)
Store this tape in a cool place, avoiding heat sources such as direct sunlight and heating equipment.
(4)
Do not use for electrical insulation as this is not insulation tape.
(5)
Do not directly apply this tape to furniture, walls, glass, vinyl chloride products, and car bodies, etc. as this may result in adhesive deposits, discoloration or peeling of paint.
(6)
This tape is not designed for application to the skin. Do not directly apply to the skin as this may result in a rash or adhesive deposits.
(7)
Depending upon the type of material which this product is to be applied to, this tape may leave adhesive residues or contaminate the adherent. Check well before use.
(8)
This tape may be spliced. Spliced portions are marked. Discard the spliced portions. The spliced portions are not included in the total effective length.
(9)
Please check that the tape suits your application before use.
(10)
Contact us when using this tape for special applications.
(TEL: 0120-147-224)
(11)
Take care when using this tape as Sliontec will not be held liable for damage occurring as a result of using this tape.
6501060502
PrintGuidelines on Printing Website Material
 
Back to List
Top of this page