Home >> Products
Search by Product
Search by Application
Product List
PrintGuidelines on Printing Website Material

No.6500 Polyimide adhesive tape

Slion Tape No. 6500 is an adhesive tape with 25 μm polyimide film used for the base material to which a 30 μm silicone based adhesive with high heat resistance has been applied.
Slion Tape No. 6500 provides high level heat resistance and dimensional stability, achieves outstanding repeeling capabilities and electrical insulation, and can be used for applications including temporary fixing and masking at high temperatures and for electrical insulation.
The base material is flame retardant and conforms to UL510FR. Slion Tape No. 6500 can be used for a wide range of applications.

Tape structure
No.6500 Polyimide adhesive tape

Applications

(1) For heat-resistant masking and splicing heat-resistant materials
(2) For temporary fixing of terminal coils

Tape Performance
Test item Unit Value
Adhesion
(to SUS plate)		 N/10 mm
(gf/25 mm)		 2.75
(700)
Tack Ball no. 25
Holding power (40°C) (Note 1) Deviation: mm 0.1
Tensile strength N/10 mm
(kgf/25 mm)		 60.0
(15)
Low speed unwinding force N/10 mm
(kgf/25 mm)		 1.8
(0.5)
Elongation % 40
Electrolytic corrosion coefficient - 1.00
Dielectric breakdown voltage
(short time period)		 kV 8

Test method: JIS Z 0237 However, the electrolytic corrosion coefficient and breakdown voltage shall conform to JIS C 2107.
Note 1) Application area:25 mm × 25 mm Load: 1 kg
* The measured values shown here are reference values only, and are not intended to serve as guaranteed values.
* The specifications of the product maybe changed without prior notice.
* ( ) Values within brackets are reference values for previously used units.

Standard Dimensions and Units Per Package
Size (width × length) Content per carton
10mm × 20m 20 rolls
15mm × 20m 12 rolls
20mm × 20m 10 rolls
25mm × 20m 8 rolls
30mm × 20m 6 rolls
50mm × 20m 4 rolls

Please consult us for other sizes.
Note) Content maybe changed without prior notice.

Directions for use
(1)
Sufficient adhesive strength may not be obtained if the surface this tape is being applied to is dirty. Remove any dirt, dust, moisture, and oil, etc. before applying this tape.
(2)
In order to obtain sufficient adhesion, apply sufficient pressure in order to bond this tape after it is affixed.
(3)
Store this tape in a cool place, avoiding heat sources such as direct sunlight and heating equipment.
(4)
Do not use for electrical insulation as this is not insulation tape.
(5)
Do not directly apply this tape to furniture, walls, glass, vinyl chloride products, and car bodies, etc. as this may result in adhesive deposits, discoloration or peeling of paint.
(6)
This tape is not designed for application to the skin. Do not directly apply to the skin as this may result in a rash or adhesive deposits.
(7)
Depending upon the type of material which this product is to be applied to, this tape may leave adhesive residues or contaminate the adherent. Check well before use.
(8)
Please check that this tape suits your application before use.
(9)
Contact us when using this tape for special applications.
(TEL: 0120-147-224)
(10)
Take care when using this tape as Sliontec will not be held liable for damage occurring as a result of using this tape.
6500060502
PrintGuidelines on Printing Website Material
 
Back to List
Top of this page