Home >> Products
Search by Product
Search by Application
Product List
PrintGuidelines on Printing Website Material

No.5978 Double-faced butyl adhesive tape for processing

Slion Tape No. 5978 is a double-faced adhesive tape that improves secondary processing (cutting and punching properties) without impairing the characteristics of conventional double-faced butyl adhesive tapes.
With a light unwinding force and reduced labor required for the bonding of a wide variety of materials, Slion Tape No. 5978 can provide increased processability and work efficiency.
This series also includes 1.0 and 0.6 mm products.

Tape structure
No.5978 Double-faced butyl adhesive tape for processing

Applications

Fixing of a wide variety of buffer materials (bonding)

Tape Performance
Test item Unit Value
Adhesion SUS plate N/10 mm 9.25*1
CR sponge 2.91*2
EPDM rubber 3.91*2
Tack Ball no. 44
Holding power (0.5 kg x 23°C) Falling: xxx minutes 295

Test method: JIS Z 0237 (2000)
*1: Cohesion failure; *2: Interfacial failure
* The measured values shown here are reference values only, and are not intended to serve as guaranteed values.
* The specifications of the product maybe changed without prior notice.
* Please verify whether or not this product is suitable for your intended application.

Standard Dimensions and Units Per Package
Size (width × length) Content per carton
1,050mm × 20m 1 roll

Please consult us for other sizes.
Note) Content maybe changed without prior notice.

Directions for use
(1)
Sufficient adhesive strength may not be obtained if the surface this tape is being applied to is dirty. Remove any dirt, dust, moisture, and oil, etc. before applying this tape.
(2)
In particular, at low temperatures, apply pressure thoroughly after affixing this tape in order to obtain sufficient adhesion.
(3)
Store this tape in a cool place, avoiding heat sources such as direct sunlight and heating equipment.
(4)
Do not use for electrical insulation as this is not insulation tape.
(5)
Do not directly apply this tape to furniture, walls, glass, vinyl chloride products, and car bodies, etc. as this may result in adhesive deposits, discoloration or peeling of paint.
(6)
This tape is not designed for application to the skin. Do not directly apply to the skin as this may result in a rash or adhesive deposits.
(7)
Depending upon the type of material which this product is to be applied to, this tape may leave adhesive residues or contaminate the adherent. Check well before use.
(8)
Please check that this tape suits your application before use.
(9)
Contact us when using this tape for special applications.
(TEL: 0120-147-224)
(10)
Take care when using this tape as Sliontec will not be held liable for damage occurring as a result of using this tape.
597800070927
PrintGuidelines on Printing Website Material
 
Back to List
Top of this page