Home >> Products
Search by Product
Search by Application
Product List
PrintGuidelines on Printing Website Material

No.5815 Double-faced electrically conductive copper foil adhesive tape

Slion Tape No. 5815-00 has 18 μm electrolytic copper foil used for the base material, to both surfaces of which an electrically conductive synthetic resin-based adhesive has been applied.
This tape enables electrical conductivity to an adherend, and achieves excellent conductivity in both thickness and lengthwise directions. This tape can be used for electromagnetic and electrostatic shielding as well as for antistatic purposes, etc.

Tape structure
No.5815 Double-faced electrically conductive copper foil adhesive tape

Applications

(1) For shielding
(2) For the fixing and temporary fixing of components, electrodes, and grounding conductors, etc.

Tape Performance
Test item Unit Value
Adhesion (for stainless steel plate) N/10 mm
(gf/25 mm)		 2.20
(560)
Tack Ball no. 7
Holding power Deviation: mm <0.1
Electric resistivity (thickness direction) Ω/inch2 2x10-2
Adhesion by adherend Aluminum N/10 mm
(gf/25 mm)		 2.10
(530)
Alumite 2.40
(610)
Copper 2.30
(585)
SPCC (Steel plate) 2.00
(510)
ABS 2.60
(660)
PC 3.00
(760)
For glass epoxy plate 2.70
(685)

Test method: JIS Z 1528
* The measured values shown here are reference values only, and are not intended to serve as guaranteed values.
* The specifications of the product maybe changed without prior notice.
* ( ) Values within brackets are reference values for previously used units.
* Please verify whether or not this product is suitable for your intended application.

Standard Dimensions and Units Per Package
Size (width × length) Content per carton
115mm × 200m 1 roll
130mm × 200m 1 roll

Please consult us for other sizes.
Note) Content maybe changed without prior notice.

Directions for use
(1)
Sufficient adhesive strength may not be obtained if the surface this tape is being applied to is dirty. Remove any dirt, dust, moisture, and oil, etc. before applying this tape.
(2)
Apply pressure thoroughly after affixing this tape.
(3)
Store this tape in a cool place, avoiding heat sources such as direct sunlight and heating equipment.
(4)
Use the tape only after thoroughly testing for adhesion, tensile strength, and durability, etc.
(5)
Do not use for electrical insulation as this is not insulation tape.
(6)
Do not directly apply this tape to furniture, walls, glass, vinyl chloride products, and car bodies, etc. as this may result in adhesive deposits, discoloration or peeling of paint.
(7)
This tape is not designed for application to the skin. Do not directly apply to the skin as this may result in a rash or adhesive deposits.
(8)
Depending upon the type of material which this product is to be applied to, this tape may leave adhesive residues or contaminate the adherent. Check well before use.
(9)
When conductive tape is to be energized, be sure to implement measures against heat generation and ignition. We assume no responsibility for accidents caused by energization.
(10)
Before using conductive tape, be sure to thoroughly conduct tests with regard to electrical conductivity and shielding performance.
(11)
Contact us when using this tape for special applications.
(TEL: 0120-147-224)
(12)
Copper foil edges possess the potential to cut. When affixing tape, exercise care in order to prevent cuts from the edges of copper foil.
(13)
Take care when using this tape as Sliontec will not be held liable for damage occurring as a result of using this tape.
5815060622
PrintGuidelines on Printing Website Material
 
Back to List
Top of this page