|
|
 |
| No.5805 |
Double-faced aluminum tape (conductive) |
|
Slion Tape No.5805 is a double-faced adhesive tape with 30 μm thick aluminum foil used for the base material, and with a conductive synthetic resin-based adhesive applied to both surfaces.
Superb conductivity in both surfaces makes Slion Tape No. 5805 suitable for bonding aluminum, copper, and other conductive substances, and for fixing using both surfaces. |
|
|
For deelectrifying brushes |
|
| Standard Dimensions and Units Per Package |
|
|
(1) |
Sufficient adhesive strength may not be obtained if the surface this tape is being applied to is dirty. Remove any dirt, dust, moisture, and oil, etc. before applying this tape. |
(2) |
In order to obtain sufficient adhesion, apply sufficient pressure in order to bond this tape after it is affixed. |
(3) |
Store this tape in a cool place, avoiding heat sources such as direct sunlight and heating equipment. |
(4) |
Do not use for electrical insulation as this is not insulation tape. |
(5) |
Do not directly apply this tape to furniture, walls, glass, vinyl chloride products, and car bodies, etc. as this may result in adhesive deposits, discoloration or peeling of paint. |
(6) |
This tape is not designed for application to the skin. Do not directly apply to the skin as this may result in a rash or adhesive deposits. |
(7) |
This tape is not designed to hold heavy loads. Use for fixing paper, film, and other light loads. |
(8) |
Depending upon the type of material which this product is to be applied to, this tape may leave adhesive residues or contaminate the adherent. Check well before use. |
(9) |
Please check that this tape suits your intended application before use. |
(10) |
Contact us when using this tape for special applications.
(TEL: 0120-147-224) |
(11) |
Take care when using this tape as Sliontec will not be held liable for damage occurring as a result of using this tape. |
|
5805060502 |
|
|
