Home >> Products
Search by Product
Search by Application
Product List
PrintGuidelines on Printing Website Material

No.5686 Double-faced Film Tape (High Adhesion)

Slion Tape No. 5686 is a double-faced thin tape with emphasis placed on transparency. 25 μm PET film is used to ensure superb punching processability. The use of a polyester film base material ensures dimensional stability and provides suitability for punching and other similar processing.

Tape structure
No.5686 Double-faced Film Tape (High Adhesion)

Applications

(1) Fixing of rubber and sponge
(2) Fixing of olefin based members

Tape Performance
Test item Unit Value
Adhesion (to SUS plate) First face N/10 mm
(gf/25 mm)		 6.62
(1,690)
Second face 5.88
(1,500)
Holding power 40°C First face mm/24h 0.6
Second face 0.5
Tack First face Ball no. 9
Second face 11
Characteristics with regard to sponge Tackiness No change

Test methods: JIS Z 0237 & 1528
* The measured values shown here are reference values only, and are not intended to serve as guaranteed values.
* The specifications of the product maybe changed without prior notice.
* ( ) Values within brackets are reference values for previously used units.

Standard Dimensions and Units Per Package
Size (width × length) Content per carton
1,050mm × 50m 1 roll

Please consult us for other sizes.
Note) Content maybe changed without prior notice.

Directions for use
(1)
Sufficient adhesive strength may not be obtained if the surface this tape is being applied to is dirty. Remove any dirt, dust, moisture, and oil, etc. before applying this tape.
(2)
In order to obtain sufficient adhesion, apply sufficient pressure in order to bond this tape after it is affixed.
(3)
Store this tape in a cool place, avoiding heat sources such as direct sunlight and heating equipment.
(4)
Do not use for electrical insulation as this is not insulation tape.
(5)
Do not directly apply this tape to furniture, walls, glass, vinyl chloride products, and car bodies, etc. as this may result in adhesive deposits, discoloration or peeling of paint.
(6)
This tape is not designed for application to the skin. Do not directly apply to the skin as this may result in a rash or adhesive deposits.
(7)
This tape is not designed to hold heavy loads. Use for fixing paper, film, and other light loads.
(8)
Depending upon the type of material which this product is to be applied to, this tape may leave adhesive residues or contaminate the adherent. Check well before use.
(9)
Please check that this tape suits your intended application before use.
(10)
Contact us when using this tape for special applications.
(TEL: 0120-147-224)
(11)
Take care when using this tape as Sliontec will not be held liable for damage occurring as a result of using this tape.
5686060502
PrintGuidelines on Printing Website Material
 
Back to List
Top of this page