Home >> Products
Search by Product
Search by Application
Product List
PrintGuidelines on Printing Website Material

No.5626 Double-faced adhesive tape for fixing water-repellent meshes

Slion Tape No.5626 is a double-faced tape with polyester film used as the base material, and with a high adhesion acrylic adhesive applied to one side and a special adhesive applied to the other side.
The "special adhesive" our company has developed provides excellent adhesion to meshes and nonwoven fabrics with water-repellent finishes (Fluorine finishes).
We also have available No. 5627 tape with a total thickness of 0.050 mm, in order to provide customers with a degree of variation in thicknesses.

Tape structure
No.5626 Double-faced adhesive tape for fixing water-repellent meshes

Applications

For fixing water-repellent finished (fluorine finished) meshes and nonwoven fabrics, etc. for speakers and microphones, etc.

Tape Performance
Test item Unit Value
Acrylic Special adhesive
Adhesion for SUS plates N/10 mm 4.28 5.68
For water-repellent meshes - 0.34
Ball tack (Note 1) Ball No. 6 <3
40°C holding power (Note 2) Deviation: mm 0.1mm 1,200 minutes

Note 1: Gradient 15°
Note 2: Load 9.8 N x 24 hours
* The above data are samples of measurements made in accordance with JIS or in-house testing methods and are not designed to serve as guaranteed values.

Standard Dimensions and Units Per Package
Size (width × length) Content per carton
1,050mm × 100m 1 roll

Please consult us for other sizes.
Note) Content maybe changed without prior notice.

Directions for use
(1)
Sufficient adhesive strength may not be obtained if the surface this tape is being applied to is dirty. Remove any dirt, dust, moisture, and oil, etc. before applying this tape.
(2)
In order to obtain sufficient adhesion, apply sufficient pressure in order to bond this tape after it is affixed.
(3)
Store this tape in a cool place, avoiding heat sources such as direct sunlight and heating equipment.
(4)
Do not use for electrical insulation as this is not insulation tape.
(5)
Do not directly apply this tape to furniture, walls, glass, vinyl chloride products, and car bodies, etc. as this may result in adhesive deposits, discoloration or peeling of paint.
(6)
This tape is not designed for application to the skin. Do not directly apply to the skin as this may result in a rash or adhesive deposits.
(7)
Depending upon the type of material to which this product is to be applied to, this tape may leave adhesive residues or contaminate the adherent. Check well before use.
(8)
Please check that this tape suits your application before use.
(9)
Contact us when using this tape for special applications.
(TEL: 0120-147-224)
(10)
Take care when using this tape as Sliontec will not be held liable for damage occurring as a result of using this tape.
(11)
With respect to special adhesion surfaces, subtle irregularities may occur on these surfaces. If subtle surface irregularities may cause problems during use, avoid using this tape.
562600070220
PrintGuidelines on Printing Website Material
 
Back to List
Top of this page