Home >> Products
Search by Product
Search by Application
Product List
PrintGuidelines on Printing Website Material

No.5560 Double-faced Butyl Rubber Foam Tape

Slion Tape No. 5560 is a double-faced tape with butyl rubber foam with outstanding weatherability and cushioning properties used for a support, and with a synthetic resin based adhesive with superb adhesion and durability coated to both surfaces.
Slion Tape No. 5560 is a tape suited for applications where adhesion to coarse surfaces and cushioning properties are required, including fixing automotive components and small interior articles.

Tape structure
No.5560 Double-faced Butyl Rubber Foam Tape

Applications

(1) For temporary fixing of curtain rails and fixing interior materials and rough surfaced tiles.
(2) For fixing wire protectors and distribution panels during the installation of telephone wiring.
(3) For fixing automotive components and accessories
(4) For fixing panels and nameplates of household electrical appliances
(5) For fixing plastic displays

Tape Performance
Test item Unit Value
Adhesion
(for SUS plates)		 N/10 mm
(gf/25 mm)		 3.14
(800)
Tack Ball No. 25
Holding power (40°C) Deviation: mm/1 hour 1.0
Shear force
(for SUS plates)		 N/25 mm x 25 mm
(kgf/25 mm x 25 mm)		 700
(71.4)

Test method: JIS Z 0237
* The measured values shown here are reference values only, and are not intended to serve as guaranteed values.
* The specifications of the product maybe changed without prior notice.
* ( ) Values within brackets are reference values for previously used units

Standard Dimensions and Units Per Package
Size (width × length) Content per carton
25mm × 10m 60 rolls
50mm × 10m 30 rolls
25mm × 20m 40 rolls
50mm × 20m 20 rolls

Please consult us for other sizes.
Note) Content maybe changed without prior notice.

Directions for use
(1)
Sufficient adhesive strength may not be obtained if the surface the tape is being applied to is dirty. Remove any dirt, dust, moisture, and oil, etc. before applying this tape.
(2)
In order to obtain sufficient adhesion, apply sufficient pressure in order to bond the tape after it is affixed.
(3)
Store this tape in a cool place, avoiding heat sources such as direct sunlight and heating equipment.
(4)
Do not use for electrical insulation as this is not insulation tape.
(5)
Do not directly apply this tape to furniture, walls, glass, vinyl chloride products, and car bodies, etc. as this may result in adhesive deposits, discoloration or peeling of paint.
(6)
This tape is not designed to be applied to the skin. Do not directly apply to the skin as this may result in a rash or adhesive deposits.
(7)
This tape is not designed to hold heavy loads. For fixing substances to which force is continuously applied, be sure to carry out final fixation using adhesives, etc.
(8)
Depending upon the type of material this product is to be applied to; this tape may leave adhesive residues or contaminate the adherent. Check well before use.
(9)
Please check that this tape suits your application before use.
(10)
Contact us when using this tape for special applications.
(TEL: 0120-147-224)
(11)
Take care when using this tape as Sliontec will not be held liable for damage occurring as a result of using this tape.
5560060502
PrintGuidelines on Printing Website Material
 
Back to List
Top of this page