Home >> Products
Search by Product
Search by Application
Product List
PrintGuidelines on Printing Website Material

No.5490 Double-faced Adhesive Tape ELV Tape

Slion Tape No. 5490 is an environmentally friendly reduced VOC emission adhesive tape with solventless adhesive coated to both surfaces of a nonwoven fabric base material.
Slion Tape No. 5490 is a product that can contribute to VOC reductions and sick-car measures in vehicle interiors through the fixing of automotive interior and buffer materials, etc (EPDM rubber foams and PP material foams).

Tape structure
No.5490 Double-faced Adhesive Tape ELV Tape

Applications

For fixing automotive interior and buffer materials

Tape Performance
Test item Unit Value
Adhesion SUS plate N/10 mm 6.70
PP plate 5.40
Tack Ball No. 12
Holding power (40°C) Deviation after 24 hours: mm <0.1

Test method: JIS Z 0237 (2000)
* The measured values shown here are reference values only, and are not intended to serve as guaranteed values.
* The specifications of the product maybe changed without prior notice.
* Refer to separate catalog for VOC emission rate.

Standard Dimensions and Units Per Package
Size (width × length) Content per carton
1,000mm × 50m 1 roll
1,020mm × 50m 1 roll
1,050mm × 50m 1 roll

Please consult us for other sizes.
Note) Content maybe changed without prior notice.

Directions for use
(1)
Sufficient adhesive strength may not be obtained if the surface the tape is being applied to is dirty. Remove any dirt, dust, moisture, and oil, etc. before applying this tape.
(2)
In order to obtain sufficient adhesion, apply sufficient pressure in order to bond the tape after it is affixed.
(3)
Store the tape in a cool place, avoiding heat sources such as direct sunlight and heating equipment.
(4)
Do not use for electrical insulation as this is not insulation tape.
(5)
Do not directly apply this tape to furniture, walls, glass, vinyl chloride products, and car bodies, etc. as this may result in adhesive deposits, discoloration or peeling of paint.
(6)
This tape is not designed to be applied to the skin. Do not directly apply to the skin as this may result in a rash or adhesive deposits.
(7)
Depending upon the type of material this product is to be applied to; this tape may leave adhesive residues or contaminate the adherent. Check well before use.
(8)
Please check that this tape suits your application before use.
(9)
Contact us when using this tape for special applications.
(TEL: 0120-147-224)
(10)
Take care when using this tape as Sliontec will not be held liable for damage occurring as a result of using this tape.
5490000810201
PrintGuidelines on Printing Website Material
 
Back to List
Top of this page