Home >> Products
Search by Product
Search by Application
Product List
PrintGuidelines on Printing Website Material

No.5487 Double-faced Adhesive Tape (Thin with High Adhesion)

Slion Tape No. 5487 is a double-faced paper tape with a nonwoven fabric used for the base material and acrylic adhesives with high adhesion applied to both surfaces.
Slion Tape No. 5486 exhibits high adhesion to almost all adherends and in particular, exhibits superb adhesion to polyolefins (polyethylene and polypropylene), which are generally difficult to affix. In addition, Slion Tape No. 5487 provides a wide working temperature range and superb durability. This tape is suited for a wide range of applications for general industry, agriculture, and construction and building materials.

Tape structure
No.5487 Double-faced Adhesive Tape (Thin with High Adhesion)

Applications

(1) For fixing identification plates such as nameplates, etc.
(2) For fixing corner members

Tape Performance
Test item Unit Value
Adhesion
(for SUS plates)		 N/10 mm
(gf/25 mm)		 5.10
(1,300)
Tack Ball No. 8
Holding power (40°C ~ 24 hours) Deviation: mm 0.5mm

Test method : JIS Z 0237 (2000) & JIS Z 1528 (2004)
* The measured values shown here are reference values only, and are not intended to serve as guaranteed values.
* The specifications of the product maybe changed without prior notice.
* ( ) Values within brackets are reference values for previously used units.

Standard Dimensions and Units Per Package
Size (width × length) Content per carton
10mm × 50m 150 rolls
20mm × 50m 30 rolls
38mm × 50m 42 rolls
50mm × 50m 30 rolls

Please consult us for other sizes.
Note) Content maybe changed without prior notice.

Directions for use
(1)
Sufficient adhesive strength may not be obtained if the surface the tape is being applied to is dirty. Remove any dirt, dust, moisture, and oil, etc. before applying this tape.
(2)
In order to obtain sufficient adhesion, apply sufficient pressure in order to bond the tape after it is affixed.
(3)
Store this tape in a cool place, avoiding heat sources such as direct sunlight and heating equipment.
(4)
Do not use for electrical insulation as this is not insulation tape.
(5)
Do not directly apply this tape to furniture, walls, glass, vinyl chloride products, and car bodies, etc. as this may result in adhesive deposits, discoloration or peeling of paint.
(6)
This tape is not designed to be applied to skin. Do not directly apply to the skin as this may result in a rash or adhesive deposits.
(7)
The tape is not designed to hold heavy loads. Use for fixing paper, film, and other light loads.
(8)
Depending upon the type of material this product is to be applied to; this tape may leave adhesive residues or contaminate the adherent. Check well before use.
(9)
Please check that this tape suits your application before use.
(10)
Contact us when using this tape for special applications
(TEL: 0120-147-224)
(11)
Take care when using this tape as Sliontec will not be held liable for damage occurring as a result of using this tape.
5487060502
PrintGuidelines on Printing Website Material
 
Back to List
Top of this page