Home >> Products
Search by Product
Search by Application
Product List
PrintGuidelines on Printing Website Material

No.5486 Double-faced adhesive tape (High Adhesion)

Slion Tape No. 5486 is a double-faced tape with nonwoven fabric used for the base material and synthetic resin-based adhesives with superb adhesion and durability coated to both surfaces.
Slion Tape No. 5486 provides high shear strength and exhibits outstanding adhesion characteristics in a wide temperature range from low to high temperatures. In addition, Slion Tape No. 5486 exhibits superior adhesive characteristics with regard to olefins including polyethylene and polypropylene, etc, which are generally difficult to affix.

Tape structure
No.5486 Double-faced adhesive tape (High Adhesion)

Applications

(1) For affixing household electrical appliances and terminals for computers, etc.
(2) For firm adhesion of a variety of construction material components.
(3) For affixing plastics, metals, glass, and plywood, etc.

Tape Performance
Test item Unit Value
Adhesion
(for SUS plates)		 0°C N/10 mm
(gf/25 mm)		 7.85 (2,000)
23°C 5.49 (1,400)
40°C 5.10 (1,300)
80°C 5.90 (1,500)
Tack Ball No. 12
Holding power (40°C) Deviation: mm 0.5
Adhesion by adherend Aluminum plate N/10 mm
(gf/25 mm)		 6.1
Polyethylene (PE) plate 4.4
Polypropylene (PP) plate 4.9
Plywood (veneer board) 5.5

Test method: JIS Z 0237 & 1528
* The measured values shown here are reference values only, and are not intended to serve as guaranteed values.
* The specifications of the product maybe changed without prior notice.
* ( ) Values within brackets are reference values for previously used units.

Standard Dimensions and Units Per Package
Size (width × length) Content per carton
25mm × 20m 60 rolls
50mm × 20m 30 rolls
25mm × 50m 60 rolls
50mm × 50m 30 rolls

Please consult us for other sizes.
Note) Content may be changed without prior notice.

Directions for use
(1)
Sufficient adhesive strength may not be obtained if the surface the tape is being applied to is dirty. Remove any dirt, dust, moisture, and oil, etc. before applying the tape.
(2)
In order to obtain sufficient adhesion, apply sufficient pressure in order to bond the tape after it is affixed.
(3)
Store this tape in a cool place, avoiding heat sources such as direct sunlight and heating equipment.
(4)
Do not use for electrical insulation as this is not insulation tape.
(5)
Do not directly apply this tape to furniture, walls, glass, vinyl chloride products, and car bodies, etc. as this may result in adhesive deposits, discoloration or peeling of paint.
(6)
This tape is not designed for application to the skin. Do not directly apply to the skin as this may result in a rash or adhesive deposits.
(7)
This tape is not designed to hold heavy loads. When fixing objects to which force is to be continuously applied, make sure to carry out final fixation using adhesives, etc.
(8)
Depending upon the type of material which this tape is to be applied to, this tape may leave adhesive residues or contaminate the adherent. Check well before use.
(9)
Please check that this tape is suitable for your intended application before use.
(10)
Contact us when using this tape for special applications.
(TEL: 0120-147-224)
(11)
Take care when using this tape as Sliontec will not be held liable for damage occurring as a result of using this tape.
5486060502
PrintGuidelines on Printing Website Material
 
Back to List
Top of this page