Home >> Products
Search by Product
Search by Application
Product List
PrintGuidelines on Printing Website Material

No.5485 Removable high adhesion double-faced tape

Slion Tape No. 548500 is a removable high adhesion double-faced tape with reinforced nonwoven fabric used as a base material.
In addition, Slion Tape No. 548500 is an environmentally friendly product with no toluene, xylene, etc. used for the adhesive material, and can be used for a wide variety of applications including fixing recycled members and affixing difficult-to-affix UV-coated surfaces, etc. The use of reinforced nonwoven fabric for the tape base material results in minimal interlaminar breakage of the tape and contributes to the promotion of recycling.

Tape structure
No.5485 Removable high adhesion double-faced tape

Applications

(1) For fixing various types of recycled members
(2) For fixing metal and plastic nameplates
(3) Fixing seal materials for OA equipment and household electrical appliances.
(4) For affixing UV coated surfaces

Tape Performance
Test item Unit Value
Adhesion
(For stainless steel plates)		 N/10 mm
(gf/25 mm)		 6.11
(1,560)
Tack Ball No. <3
Holding power (40 deg C, 9.8N) Deviation: mm/24h <0.5

Test method: JIS Z 1528 (2004)
* The measured values shown here are reference values only, and are not intended to serve as guaranteed values.
* The specifications of the product maybe changed without prior notice.
* ( ) Values within brackets are reference values for previously used units.

Standard Dimensions and Units Per Package
Size (width × length) Content per carton
10mm × 50m 108 rolls
20mm × 50m 60 rolls
30mm × 50m 36 rolls
50mm × 50m 24 rolls
100mm × 50m 12 rolls
1,200mm × 50m 1 roll

Please consult us for other sizes.
Note) Content maybe changed without prior notice.

Directions for use
(1)
Sufficient adhesive strength may not be obtained if the surface the tape is being applied to is dirty. Remove any dirt, dust, moisture, and oil, etc. before applying the tape.
(2)
In order to obtain sufficient adhesion, apply sufficient pressure in order to bond the tape after it is affixed.
(3)
Store the tape in a cool place, avoiding heat sources such as direct sunlight and heating equipment.
(4)
Do not use for electrical insulation as this is not insulation tape.
(5)
Do not directly apply this tape to furniture, walls, glass, vinyl chloride products, and car bodies, etc. as this may result in adhesive deposits, discoloration or peeling of paint.
(6)
This tape is not designed for application to the skin. Do not apply directly to the skin as this may result in a rash or adhesive deposits.
(7)
This tape is not designed to hold heavy loads. Use for fixing paper, film, and other light loads.
(8)
Depending upon the type of material to which this product is to be applied to, this tape may leave adhesive residues or contaminate the adherent. Check well before use.
(9)
Please check that this tape suits your application before use.
(10)
Contact us when using this tape for special applications.
(TEL: 0120-147-224)
(11)
Take care when using this tape as Sliontec will not be held liable for damage occurring as a result of using this tape.
485060502
PrintGuidelines on Printing Website Material
 
Back to List
Top of this page