Home >> Products
Search by Product
Search by Application
Product List
PrintGuidelines on Printing Website Material

No.5463 Double-faced Adhesive Tape (For Urethane Foam)

Slion Tape No. 5463 is a double-faced adhesive tape with superb adhesion to various foams (urethane foam, polyethylene foam, etc.) and plastics. The tape is also suited for bonding olefin-based materials.
This tape is an environmentally friendly product with no toluene, xylene, etc. used for the adhesive material. This tape can be used for a wide range of applications in automotive, light electrical, and construction industries.

Tape structure
No.5463 Double-faced Adhesive Tape (For Urethane Foam)

Applications

(1) Bonding of urethane foam
(2) Bonding of various kinds of foam materials
(3) Bonding of olefin-based (PP and PE) materials

Tape Performance
Test item Unit Value
Adhesion
(for SUS plates)		 N/10 mm
(gf/25 mm)		 5.00
(1.280)
Tack: gradient ∠15° Ball No. 8
Holding power (40 deg C, 9.8N) Deviation: mm/24h 2.0

Test method: JIS Z 0237
* The measured values shown here are reference values only, and are not intended to serve as guaranteed values.
* The specifications of the product maybe changed without prior notice.
* ( ) Values within brackets are reference values for previously used units.

Adhesion by adherend
Test item Units Value
Polyethylene (PE) plate N/10mm
(gf/25mm)		 3.40
(870)
Polypropylene (PP) plate 5.60
(1,430)
Glass plate 6.50
(1,660)
Acrylic plate 6.50
(1,660)
ABS plate 6.20
(1,580)
Ether-based urethane 2.00 *
(510)
Ester-based urethane 2.50 *
(640)
Expanded polystyrene 3.50
(900)

* Material failure

Standard Dimensions and Units Per Package
Size (width × length) Content per carton
10mm × 50m 150 rolls
20mm × 50m 90 rolls
30mm × 50m 60 rolls
50mm × 50m 30 rolls
100mm × 50m 18 rolls
500mm × 50m 2 rolls
1000mm × 50m 1 roll
1200mm × 50m 1 roll

Please consult us for other sizes.
Note) Quantities contained may be changed without prior notice.

Directions for use
(1)
Sufficient adhesive strength may not be obtained if the surface the tape is being applied to is dirty. Remove any dirt, dust, moisture, oil, etc. before applying the tape.
(2)
In order to obtain sufficient adhesion, apply sufficient pressure in order to bond the tape after it is affixed.
(3)
Store this tape in a cool place, avoiding heat sources such as direct sunlight and heating equipment.
(4)
Do not use for electrical insulation as this is not insulation tape.
(5)
Do not directly apply this tape to furniture, walls, glass, vinyl chloride products, car bodies, etc, as this may result in adhesive deposits, discoloration or peeling of paint.
(6)
This tape is not designed for application to the skin. Do not directly apply to the skin as this may result in a rash or adhesive deposits.
(7)
This tape is not intended for holding heavy loads. Use for fixing paper, film, and other light loads.
(8)
Depending upon the type of material this tape is to be applied to; this tape may leave adhesive residues or contaminate the adherent. Check well before use.
(9)
Please check that this tape suits your application before use.
(10)
Contact us when using this tape for special applications.
(TEL: 0120-147-224)
(11)
Take care when using this tape as Sliontec will not be held liable for damage occurring as a result of using this tape.
5463060502
PrintGuidelines on Printing Website Material
 
Back to List
Top of this page