|
|
 |
| No.5087 |
Heat Resistant High Adhesion Double-faced Tape |
|
Slion Tape No.5087 is a transfer tape using a highly adhesive type of plastic adhesive that has excellent resistance to heat and weather.
Because of the excellent transparency afforded by having no backing and its high adhesion, it is suited for permanent adhesion. |
|
|
|
(1) |
Joining of metals, plastics, etc. |
(2) |
Fixing of transparent materials such as nameplates and signs |
(3) |
Fixing of precision equipment, electronic components, wiring accessories, residential equipment, etc. |
|
|
|
| Test item |
Unit |
Value |
Adhesion
(against stainless steel plate) |
N/10mm
(gf/25mm) |
17.0
(4,340) |
| Shear adhesion |
room temperature |
N/cm2 |
44 |
| Holding power |
(40 deg C, 9.8N) |
Creep in (mm/24hrs) |
< 0.5 |
|
|
|
| Test method: JIS Z 1541 & 0237 |
|
• Adhesion: |
Through intermediary of Aluminum foil (0.130mm) press each adherends with 5kg roller for 1 back and forth. After 72 hours measure the peel adhesion at 90 degree angel (speed: 300mm/min). |
• Shear adhesion: |
Apply the specimen to stainless steel plate, then press with 5kg roller for 1 back and forth, 72 hours later measure at 23 deg C speed 50mm/min. |
• Holding power: |
According to JIS Z 1541, apply specimen to stainless steel plate at 40 and 80 deg C measure the creep after weigh it with 9.8N weight. |
|
|
* The values measured are referential only, not guaranteed value.
* The spec of the product maybe changed without prior notice.
* Values within brackets are referential unit values.
* Please verify whether or not this product is suitable for your usage. |
|
|
| Standard Size and packaging |
|
|
(1) |
Sufficient adhesive strength may not be obtained if the surface the tape is being applied to is dirty. Remove any dirt, dust, moisture, oil, etc. before applying the tape. |
(2) |
Avoid direct hand contact to the adhesive surface. |
(3) |
When the tape is rewound to the oblique direction, release liner may go misaligned. Be careful while rewinding. |
(4) |
Apply pressure after applying the tape by using 5kg load roller, etc. for even pressing. Give enough pressure as this tape has low initial adhesion. |
(5) |
Avoid using this tape for fixing items subject to strong force couple of hours after application. Radical adhesion can be obtainable after 24 hours from application. |
(6) |
When the tape is applied to wrong place and needs to be re-applied, use new tape. |
(7) |
Bonding property of this tape under 15 deg. C is not good as it is designed to be used around 23 deg. C. Please check that the tape works well before use. |
(8) |
Store the tape in a cool place, avoiding heat sources such as direct sunlight and heating equipment. |
(9) |
Do not use for electrical insulation as this is not insulation tape. |
(10) |
Do not directly apply the tape to furniture, walls, glass, vinyl chloride products, car bodies, etc. as this may result in adhesive deposits, discoloration or peeling of paint. |
(11) |
This tape is not designed for application to skin. Do not directly apply to skin as this may result in a rash or adhesive deposit. |
(12) |
Depending upon the type of material which to be applied to, this tape may leave adhesive residue or contaminate the adherent. Check well before use. |
(13) |
Please check that the tape suits your application before use. |
(14) |
Contact us when using the tape for special applications.
(TEL: 81-44-935-2485) |
(15) |
Take care when using the tape as Sliontec shall not be held liable for damage occurring as a result of using the tape. |
|
5087051005 |
|
|
