 |
|
(1) |
Sufficient adhesive strength may not be obtained if the surface the tape is being applied to is dirty. Remove any dirt, dust, moisture, oil, etc. before applying the tape. |
(2) |
Avoid direct hand contact to the adhesive surface. |
(3) |
When the tape is rewound to the oblique direction, release liner may go misaligned. Be careful while rewinding. |
(4) |
Apply pressure after applying the tape by using 5kg load roller, etc. for even pressing. Give enough pressure as this tape has low initial adhesion. |
(5) |
Avoid using this tape for fixing items subject to strong force couple of hours after application. Radical adhesion can be obtainable after 24 hours from application. |
(6) |
When the tape is applied to wrong place and needs to be re-applied, use new tape. |
(7) |
Bonding property of this tape under 15 deg. C is not good as it is designed to be used around 23 deg. C. Please check that the tape works well before use. |
(8) |
Store the tape in a cool place, avoiding heat sources such as direct sunlight and heating equipment. |
(9) |
Do not use for electrical insulation as this is not insulation tape. |
(10) |
Do not directly apply the tape to furniture, walls, glass, vinyl chloride products, car bodies, etc. as this may result in adhesive deposits, discoloration or peeling of paint. |
(11) |
This tape is not designed for application to skin. Do not directly apply to skin as this may result in a rash or adhesive deposit. |
(12) |
Depending upon the type of material which to be applied to, this tape may leave adhesive residue or contaminate the adherent. Check well before use. |
(13) |
Please check that the tape suits your application before use. |
(14) |
Contact us when using the tape for special applications.
(TEL: 81-44-935-2485) |
(15) |
Take care when using the tape as Sliontec shall not be held liable for damage occurring as a result of using the tape. |
|
5081050927 |
|
