 |
|
(1) |
Sufficient adhesive strength may not be obtained if the surface the tape is being applied to is dirty. Remove any dirt, dust, moisture, oil, etc before applying the tape. |
(2) |
Avoid direct hand contact with the adhesive surface. |
(3) |
When storing this tape, avoid locations exposed to direct sunlight and heat sources such as space heaters, etc, and store in a cool dark location. |
(4) |
Apply pressure after applying the tape by using a 5 kg load roller, etc. for even pressing. Apply sufficient pressure as this tape has low initial adhesion. |
(5) |
Avoid using this tape to fix items subject to strong forces a couple of hours after application. Normal adhesive strength is obtained 24 hours after application. |
(6) |
When tape is applied to an incorrect location and needs to be re-applied, use new tape. |
(7) |
The bonding properties of this tape below 15oC are not good as it is designed to be used at approximately 23oC. Please check that this tape works well before use. |
(8) |
Store the tape in a cool place, avoiding heat sources such as direct sunlight and heating equipment. |
(9) |
Do not use for electrical insulation as this is not insulation tape. |
(10) |
Do not directly apply this tape to furniture, walls, glass, vinyl chloride products, and car bodies, etc. as this may result in adhesive deposits, discoloration or peeling of paint. |
(11) |
This tape is not designed for application to the skin. Do not directly apply to the skin as this may result in a rash or adhesive deposits. |
(12) |
Depending upon the type of material which this tape is to be applied to, this tape may leave adhesive residues or contaminate the adherent. Check well before use. |
(13) |
Please check that this tape suits your application before use. |
(14) |
Contact us when using this tape for special applications.
(TEL: 0120-147-224) |
(15) |
Take care when using this tape as Sliontec will not be held liable for damage occurring as a result of using this tape. |
|
5067100401 |
|
